Our Prep Process: The Legacy Way

We believe every great finish begins with proper preparation.

Exterior Painting

Exterior Painting – Prep Steps

Exterior Walkthrough & Surface Evaluation
We assess for moisture damage, cracks, mildew, or peeling paint.

  1. Pressure Washing
    A full wash removes dirt, mildew, old paint flakes, and surface contaminants.

  2. Surface Repairs
    Cracks, damaged siding, and holes are caulked or patched as needed.

  3. Sanding & Scraping
    Flaking or peeling areas are hand-scraped and sanded smooth.

  4. Covering Plants, Fixtures & Surfaces
    Landscaping, windows, doors, and non-paintable surfaces are protected with tarps and painter’s plastic.

  5. Priming (As Needed)
    Exposed wood or patched areas are primed to ensure long-lasting results.

  6. Taping & Masking Trim or Accents
    Sharp lines and details come from careful masking of doors, gutters, and accents.

  7. Final Prep Check
    We inspect all surfaces and protection before painting begins.

Interior Painting

Interior Painting – Prep Steps

Initial Walkthrough & Color Confirmation
We confirm paint color(s), sheen, and surface areas to be painted.

  1. Furniture & Floor Protection
    Client is responsible to move Large furniture to a desired location or center of the room . All furniture is covered with plastic. Floors are fully protected with drop cloths or plastic sheeting.

  2. Surface Cleaning
    Walls and trim are wiped down to remove dust, grease, and debris.

  3. Hole Filling & Crack Repair
    We patch nail holes, minor dents, and surface cracks using spackle or caulk.

  4. Sanding
    Once repairs dry, we sand smooth for an even surface and optimal paint adhesion.

  5. Taping & Masking
    We tape off baseboards, trim, outlets, switches, and any areas not being painted.

  6. Priming (If Needed)
    Stained or repaired areas are primed for uniform color and durability.

  7. Final Inspection Before Painting
    We walk the space again before opening a can of paint to ensure everything is prepped properly.

Custom Woodworking & Wall Accents

Woodwork & Accent Wall Installation – Prep Steps

  1. Design Consultation & Wall Measurement
    We take precise measurements and review design options (style, height, material).

  2. Wall Inspection & Cleaning
    Walls are checked for structural issues, then cleaned for paint prep.

  3. Outlet/Switch Removal & Layout Marking
    Electrical covers are removed. We map out the layout directly on the wall to ensure symmetry.

  4. Material Cut & Prep
    Boards are cut on-site or prepped in advance based on the final design. All pieces are pre-sanded.

  5. Wall Protection
    Adjacent walls and floors are covered before installation.

  6. Installation of Trim, Panels or Battens
    Boards are installed using a laser level and adhesive/nail combo for stability and precision.

  7. Filling Gaps & Seams
    Nail holes and seams are caulked and filled for a seamless finish.

  8. Final Sanding & Prime (If Painting)
    Once dry, the wall is lightly sanded and primed for a smooth final coat.

Contact us

If you need assistance determining the best direction for your project, please don’t hesitate to contact us. We’re here to answer any questions and support your decision-making process.